مجموعة الآلات البسيطة

Make a Wearable

Create a wearable that solves a challenge in your daily activities.

90-45 دقيقة
متوسط
الصف 4
MM_Maker_watch_SM

1. Introduction/Discussion

Allow the students to interpret the worksheets for themselves, or read the MAKER connect text aloud to set the scene.

2. Find a Problem

As students look at the connect images and questions, facilitate a discussion to steer them toward a problem. Once they have decided upon a problem to solve, ensure that they record it on their worksheet.

3. Brainstorm

Students should initially work independently, spending three minutes to generate as many ideas as they can to solve the problem. They can use the bricks from the set during the brainstorming process, or sketch out their ideas.
Students can now take turns sharing their ideas within their groups. Once all of the ideas have been shared, each group should select the best idea(s) to make. Be prepared to help facilitate this process to ensure that the students choose something that is possible to make.
Encourage diversity, not all student groups have to make the same thing.
Encourage the students to share their learning process. Provide them with the opportunity to share their thinking, ideas, and reflections using the documentation tool(s) they have available.

Possible Wearables Solution, for Inspiration
Note: You are advised not to share these images with students.

lego-maker-watch
lego-maker-arm-wearable

4. Choose the Best Idea

Students must record up to three design criteria (three things their design must achieve) so that they can refer to it when they review and revise their solution.

5. Go MAKE

Students make one of the ideas using the LEGO® Simple Machines set and other materials as needed.
Reinforce that students do not have to come up with the whole solution from the start. For example, if they are making some eyewear/glasses, they could explore the shape and fit on the face before looking at the temples (ear supports).
During the making process, remind students to test and analyze their idea as they go, making improvements where necessary. If you want students to submit their documentation at the end of the lesson, ensure that they record their design journey during the making stage using sketches and photos of their models.

6. Evaluate What You Have Made

Students test and evaluate their designs against the design criteria they recorded before they started making their solution.
Allow the students to select the tool(s) they find appropriate for capturing and sharing their reflections. Encourage them to use text, videos, images, sketchnotes, or another creative medium.

7. Present Your Model

Allow time for each student or student group to present what they have made to the class. A good way to do this is to set out a table large enough to display all of the models. If time is short, two groups can present to each other.

8. Assessment

Students use the Maker self-assessment rubric to evaluate their design work. Each rubric includes four levels of achievement. The intention is to help students reflect on what they have done well and what they could have done better. Each rubric can be linked to engineering related learning goals from the NGSS.

9. Tidy Up

Ensure that you leave enough time at the end of the lesson to break the models down and sort them back into the LEGO boxes. You will need approximately 10 minutes to do this.

دعم المعلم

After completing this lesson, students will have:
Defined a clear design need
Developed their ability to iterate and improve design solutions
Developed their problem-solving and communication skills
Have used and understood the design process

Rubber bands (optional)
Cardboard (optional)
Neoprene rubber sheet (optional)
Thin plastic sheet (optional)

NGSS
Science and Engineering Practices
3-5-ETS1.1, 3-5-ETS1-2, 3-5-ETS1-3

Disciplinary Core Ideas
ETS1.A, (3-5-ETS1-1)
ETS1.B, (3-5-ETS1-2), (3-5-ETS1-3)
ETS1.C, (3-5-ETS1-3)

Common Core State Standards
ELA/Literacy
RI.5.1, RI.5.7, W.5.8

Mathematics
MP.2, MP.4

مادة الطالب

ورقة عمل الطالب

Download to view and share the student worksheet.

المشاركة مع:

غرفة درس Googleغرفة درس Google

LEGO, the LEGO logo, the Minifigure, DUPLO, the SPIKE logo, MINDSTORMS and the MINDSTORMS logo are trademarks and/or copyrights of the LEGO Group. ©2024 The LEGO Group. All rights reserved. Use of this site signifies your agreement to the terms of use.