Product Resources & Support

LEGO® Education SPIKE™ Essential Resources

Go to product page

LEGO® Education SPIKE Essential FAQs

General Questions

What is LEGO® Education SPIKE Essential?
LEGO® Education SPIKE Essential is part of the LEGO® Learning System. It’s an exciting hands-on solution that uses playful learning experiences to engage primary school students in STEAM learning, putting them on the path to becoming resilient, independent thinkers.
This playful, narrative-based learning experience encourages students to investigate STEAM concepts while contributing to literacy, math, and social-emotional skills development. It uses Minifigures, with different characteristics and personalities, to make problem-solving relatable to all students through standards-aligned learning units. Icon- and word-based block coding with simple hardware—including an intelligent two-port Hub, motors, a Light Matrix, and a Color Sensor—help students bring their creations to life. A variety of age-appropriate tools help students develop into independent STEAM thinkers as their learning progresses from grade to grade. SPIKE Essential is accompanied by a comprehensive professional development program.

Which products comprise the LEGO® SPIKETM Essential family?
SPIKE Essential offers 1 core set and 7 supplemental SKUs.
• 45345 LEGO® Education SPIKE Essential Set
• 45605 LEGO® Technic Color Sensor
• 45607 LEGO® Technic Small Angular Motor
• 45608 LEGO® Technic 3x3 Color Light Matrix
• 45609 LEGO® Technic Small Hub
• 456012 LEGO® Technic Small Hub Battery
• 2000722 LEGO® Education SPIKE Essential Replacement Pack 1
• 2000723 LEGO® Education SPIKE Essential Replacement Pack 2

What is the target age group?
SPIKE Essential is designed for lower and upper primary school students ages 6+. The target age group may vary between countries because country-specific curriculum needs determine where each lesson is mapped.

What is the recommended number of students per set?
As with all of the LEGO Learning System solutions, we recommend one set for every two students in a classroom setting.

What is included in the SPIKE Essential Set?
The SPIKE Essential Set contains 449 elements, including intelligent hardware and a colorful selection of familiar, stackable, and age-appropriate LEGO bricks. The hardware includes a 2-Port Hub, 2 Small Motors, a Light Matrix, and a Color Sensor, which students can combine with icon- and word-based block coding in the LEGO® Education SPIKE App to bring their creations to life! The set comes with 4 Minifigures, each with a distinct personality, who act as storytellers to make problem-solving relatable to all students. The set also includes replacement elements and a durable storage box with color-coded sorting trays to simplify the building process and classroom management.

Is SPIKE Essential meant to replace WeDo 2.0?
SPIKE Essential is part of the new LEGO Learning System. It targets a broader age group than WeDo 2.0, and it’s the foundation of the LEGO Education portfolio for primary schools.

How do I start using SPIKE Essential with my students?
Please visit LEGOeducation.com/start and follow the SPIKE Essential onboarding guide for your unit grade band.


How much learning content does SPIKE Essential offer?
SPIKE Essential offers 5 curriculum units for primary school students in grades 1–5. Each curriculum unit includes lesson plans and teaching resources for 7-8, 45-minute lessons (including an open project, 2 x 45 min). Additionally, each lesson includes 30+ minutes of language arts or math extensions. Therefore, each curriculum unit contains a total of 6–10 hours of educational content.

US Only
For the US market 5 additional science focused units have been created to closer align to the science curriculum in 1st-5th grade. These units are specifically designed to teach Physical Science, Life Science and Earth Space Science topics.

Are the science units available in other languages than US English?
No, the science units are only available in US English.

Which educational standards are covered?
Every lesson is designed to help students develop a full range of STEAM skills. SPIKE Essential mainly covers curriculum standards within science, engineering, and computer science, with extension activities that contribute to literacy and math. For detailed market-specific educational standards, please see the individual activities on LEGOeducation.com/lessons .

In which languages is the SPIKE Essential curriculum available?
Like all of the LEGO Learning System products, the SPIKE Essential curriculum is available in 21 languages: English (US), English (UK), English (AU), Chinese (simplified), Japanese, Russian, German, Dutch, Swedish, Norwegian, Danish, French, Italian, Korean, Portuguese (BR), Spanish, Spanish (MX), Polish, Turkish, Vietnamese, and Arabic.

Where can I find SPIKE Essential lesson plans and teaching resources?
You’ll find SPIKE Essential lesson plans on LEGOeducation.com/lessons along with online lesson plans and teaching resources for all LEGO Education products. You can search by product, grade, subject, or keyword to find an engaging lesson that fits your needs.

What type of assessment tools are included with SPIKE Essential?
Each SPIKE Essential lesson offers an observational checklist for teachers, and tools to support student self-assessment and peer (student-to-student) feedback.

Hybrid Learning

Does SPIKE Essential offer hybrid learning opportunities?
Yes! SPIKE Essential offers hybrid extensions that provide the flexibility to extend the SPIKE Essential experience to remote environments, and to help students to continue their learning outside of class. Used in combination with the classroom sets, the Personal Learning Kits are designed to support hybrid learning by reinforcing students’ learning outcomes at home.

We offer two versions of the Personal Learning Kit.
• 2000471 LEGO® Education BricQ Motion Essential Personal Learning Kit
• 2000470 LEGO® Education BricQ Motion Prime Personal Learning Kit

Available in the US only (these will replace 2000471 and 2000470 on January 1st, 2023):
• 2000481 LEGO® Education Personal Learning Kit Essential
• 2000480 LEGO® Education Personal Learning Kit Prime

The Hub

Do I need to update the Hub’s operating system (OS) before getting started?
When a user connects a Hub to their device, the app verifies compatibility with the installed version of the OS. If it’s not compatible, the app notifies the user that the OS must be updated before continuing.

How do I update the Hub’s operating system?
Hub updates differ depending on the device you’re using. To update your Hub, simply follow the instructions below or the in-app instructions that will appear when an update is needed.

Note: whenever possible we recommended using a USB connection for updating.

Windows & MAC

  1. Open the app. If you don’t have the app installed, use the online updater at LEGOeducation.com/HubOS.
  2. Connect the Hub to your computer using the USB cable supplied with your LEGO® Education SPIKE Prime Set.

IOS & Androidi

It’s not currently possible to update your Hub using an iPad.

To update your Hub:

  1. Find a compatible Windows, macOS or Chromebook device.
  2. Connect the Hub to your device using the USB cable supplied with the SPIKE Prime Set. Install (if necessary) and open the Chrome browser on the device and run the online updater at LEGOeducation.com/HubOS.


  1. Connect the Hub to your Chromebook using the USB cable supplied with the SPIKE Prime Set.
  2. Open the Chrome browser and run the online updater at LEGOeducation.com/HubOS.

Can I update the Hub operating system (OS) via Bluetooth?
Yes, but whenever possible we recommended using a USB connection during the update process.

How do I rename the Hub?
When connecting to a Hub that hasn't been renamed, the LEGO® Education SPIKE App will automatically ask you to rename it. Giving each Hub a unique name will help you differentiate between multiple Hubs in close proximity (e.g. when using Bluetooth).

What type of batteries can I use in the Hub?
You can only use the Rechargeable Battery that comes in the LEGO® Education SPIKE Prime Set. It’s charged using the micro-USB cable that’s included in the set. The battery is also available to buy separately.

What type of USB power chargers do you recommend for charging the Hub?
We recommend using a high-quality power charger from a reputable brand because these are often DVP- (dedicated charging port) or CDP- (charging downstream port) type chargers

**What is the charging time for the Hub battery?
The Hub uses standard USB 500mA charging current. The charging time (from empty to full) is approximately 3 hours. **

How can I preserve my Hub’s battery life?
If the Hub isn’t going to be used for an extended period, we suggest fully charging the battery before storing it. Storing the Hub with a completely drained battery is not recommended. You can also extend the battery life by removing the battery from your Hub before storing it.

What do the Hub’s colour-coded error messages mean?
If you’re having issues starting or connecting your Hub, you might see the Light display a colour-coded error message. Here’s an overview of the error messages and how to fix them. 


The Light is flashing orange.
The Hub's battery is running low. Connect the Hub to your device via the USB cable to begin charging the battery.

The Light is flashing red.
There’s an extended load on the Hub. Turn off the Hub and let it cool down for 15 minutes.

The Light is blue.
The Hub is connected to your device using BLE (Bluetooth Low Energy).

The Light is white.
The Hub is connected to your device using a USB cable.

The Light is flashing white.
The Hub is waiting to be connected.

The Light is flashing violet/green/blue.
The Hub OS has been updated, and it’s restarting.

Can I use any micro-USB cable to connect the Hub to my device?
No. You must use a USB 2.0 cable with a male-to-micro-B connector and an AWG 24 wire gauge. We strongly advise that you only use the micro-USB cable that was supplied as part of the SPIKE Essential Set. This cable can also be purchased separately (45611 - LEGO Technic Micro-USB Connector Cable).

Are Download and Streaming Modes supported by both SPIKE Prime and SPIKE Essential?
No. The SPIKE Essential Hub exclusively supports Streaming Mode, whilst the SPIKE Prime Hub solely supports Download Mode.

How do I turn off the hub?
You can turn off the hub by pressing the button and holding it down for 10 seconds till the light turns off.

How stable is Bluetooth connectivity in a classroom setting?
The SPIKE portfolio’s Bluetooth connectivity is based on a Bluetooth Low Energy (BLE) connection. The connection process runs smoothly in a classroom setting.


What is the LEGO® Education SPIKE App?
The SPIKE App is a pupil-facing app that can be used with both SPIKE Essential and SPIKE Prime to follow and complete lessons. The app includes “getting started” material, lessons, building instructions, and a series of coding experiences that progress from icon- and word-block coding based on Scratch to text-based coding based on Python (The Python API will be available in an update coming soon).

In which languages is the SPIKE App available?
Like all of the elements in the LEGO® Learning System, the SPIKE App is available in 21 languages: English (US), English (UK), English (AU), Chinese (simplified), Japanese, Russian, German, Dutch, Swedish, Norwegian, Danish, French, Italian, Korean, Portuguese (BR), Spanish, Spanish (MX), Polish, Turkish, Vietnamese and Arabic.

The app interface is in Finnish, so why isn’t Finnish lesson content available?
SPIKE Essential doesn’t support content in Finnish. However, SPIKE Prime does support Finnish, which is why this language appears in the shared app.

Which coding language is the LEGO® Education SPIKE App built on?
The SPIKE App uses an intuitive drag-and-drop coding language that’s based on Scratch. Some of the blocks are identical to the ones that are used in Scratch 3.0, while others have been specially developed to interact with the LEGO® Education SPIKE hardware.

Which coding grammar can be used in the app?
The app includes icon blocks and word blocks. A new Python API will be available in an update coming soon.

Which operating systems are compatible with SPIKE Prime?
The SPIKE App is available for Win10, Chrome OS, iOS, Android and macOS.

Why isn't SPIKE Essential available for Windows 7?
Microsoft implemented Windows 7 ‘end of life’ in January 2020. This means that it has discontinued all support, including paid support; and all updates, including security updates. Therefore, LEGO Education has decided to focus on Windows 10.

Can both SPIKE Essential and SPIKE Prime be used with the same app?
Yes. The SPIKE App can be used with both SPIKE Essential and SPIKE Prime.

Can you connect more than one Hub to the same device at the same time?
No. You can only connect one Hub at a time.

Can SPIKE Essential be programmed with Python?
SPIKE Prime can soon be programmed using the Python editor in the SPIKE App. The Python Editor is part of a coming update to the SPIKE App.

Can SPIKE Essential be programmed with icon blocks?
Yes. SPIKE Prime can be programmed using icon blocks.


Is SPIKE Essential compatible with SPIKE Prime?
Yes. You can use all of the motors and sensors with both the SPIKE Essential and SPIKE Prime Hubs. There are both icon blocks and word blocks for all the hardware elements.

Is SPIKE Essential compatible with WeDo 2.0 or EV3?
Even though the SPIKE Essential and WeDo 2.0 hardware share the same plug system and therefore fit together, you can't combine this hardware and use the SPIKE App or WeDo 2.0 App to code it.
The SPIKE Essential hardware doesn’t offer backward compatibility with LEGO® MINDSTORMS® Education EV3 because the plug system is different. LEGO MINDSTORMS Education EV3 is based on an RJ12 plug system, whereas SPIKE Essential uses the LPF2 plug system, which is a proprietary LEGO plug system. There’s also no backward compatibility on the programming side.

Professional Development

Is professional development available?
Yes. SPIKE Essential is supported by a comprehensive professional development program comparable to the one that’s available for SPIKE Prime. The program includes:
• Online self-guided training
o Product training videos to learn how to get started using the product
o Competency-based modules
• Facilitated training
o Full-day training


Can LEGO Education SPIKE Essential be used in FIRST LEGO League?
Yes. Both WeDo 2.0 and SPIKE Essential can be used in FIRST LEGO League. The FIRST LEGO League Explore experience is optimized for SPIKE Essential and supported by the brand new Explore unit.

SPIKE Essential vs. other LEGO Education Solutions

What are the differences between SPIKE Essential and WeDo 2.0?
WeDo 2.0 targets grades 2–4, whereas SPIKE Essential more broadly targets curriculum standards for grades 1–5. WeDo 2.0 focuses on the science curriculum (physical and life science, and engineering), while SPIKE Essential has a true cross-curricular STEAM approach with purposeful integration of literacy, math, and social-emotional learning.
The physical boxes differ in that SPIKE Essential includes more elements and intelligent hardware components along with the Rechargeable Battery, which doesn’t need to be purchased separately like it has for WeDo 2.0.

What are the differences between SPIKE Essential and LEGO® Education BricQ Motion Essential?
These solutions have different learning focuses. LEGO® Education BricQ Motion Essential is designed as a hands-on introduction to the LEGO Learning System with a focus on physical science and experimenting with forces, motion, and interactions. It’s an analog solution that doesn’t require any technology.
SPIKE Essential is a comprehensive, digitally enhanced STEAM learning solution, which offers a broad range of units covering STEAM subjects, including engineering, science, and computer science.
BricQ Motion Essential gives students a strong foundational understanding of physical science concepts (i.e., forces, motion, and interactions) while setting the stage for computational thinking (e.g., cause and effect, data analysis and synthesis).
Combining SPIKE Essential and BricQ Motion Essential makes it possible to cover more comprehensive STEAM standards. Used together, these solutions unlock even more learning opportunities by supplementing each other’s learning outcomes.

What are the differences between SPIKE Essential and SPIKE Prime?
SPIKE Prime is the go-to solution for secondary education as it engages students in critical thinking, data analysis, and prototype development as they refine creative hands-on solutions to real-world problems. It allows them to explore topics like data science while setting the foundation for future study of machine learning and artificial intelligence.
SPIKE Essential is designed to get primary school students excited about STEAM learning at a young age with playful and relatable problem-solving challenges that help them become resilient, independent thinkers.
Both SPIKE Essential and SPIKE Prime are designed as integrated solutions within the LEGO Learning System. They follow the same consistent scaffolded structure and design that makes the system easy for students to enter yet hard to fully master. Therefore, using SPIKE Essential in students’ younger years and progressing to SPIKE Prime will drive familiarity for quicker and deeper learning.
The experience of both products is anchored in the same student-facing app, which makes it easy for students to jump right in and unlock their full potential for deeper learning.

Is SPIKE Essential similar to the retired LEGO Education product “StoryStarter”?
StoryStarter was a hands-on tool that inspired students to collaborate while creating and communicating stories using LEGO bricks. StoryStarter focused on building the story, reflecting, sharing, and documenting. While SPIKE Essential has storytelling elements, it uses them as a catalyst for STEAM learning.

LEGO, the LEGO logo, the Minifigure, DUPLO, the SPIKE logo, MINDSTORMS and the MINDSTORMS logo are trademarks and/or copyrights of the LEGO Group. ©2024 The LEGO Group. All rights reserved. Use of this site signifies your agreement to the terms of use.