Use a Large Motor

These steps can take up to 15 minutes.

Connect a Large Motor

Now you will learn to control the Large Motor.

Connect a Large Motor to Port D of your EV3 Brick using any of the connector cables.

Create and Run This Program

1. Create the program as shown by dragging the Large Motor Block to the programming string.

2. Make sure that the port specified on the block matches the port that your motor is connected to.

It should be Port D in both cases.

3. Download and run the program.

Did It Rotate?

Confirm that your motor has turned one rotation at power level 50 before stopping.

Download and run the program as many times as you want in order to verify this.

Click here to access the next project